background image

UM10539

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2012. All rights reserved.

User manual

Rev. 1 — 7 March 2012 

3 of 7

NXP Semiconductors

UM10539

NVT2003DP, NVT2004TL and NVT2006PW demo boards

1. Introduction

The NVT2003DP (OM13319), NVT2004TL (OM13316) and NVT2006PW (OM13323) 
demo boards are designed to evaluate the NXP 3-channel, 4-channel and 6-channel 
bidirectional voltage level translators. The demo boards interface between device I/Os 
operating at different voltage levels. Since the NVT2003DP, NVT2004TL and 
NVT2006PW devices are passive devices, pull-up resistors may be needed depending on 
the I/O interface type (totem pole or open-drain), difference in translation voltage, and the 
translation direction (high to low voltage, low to high voltage, or bidirectional). The 
NVT2003DP, NVT2004TL and NVT2006PW devices allow translations between any 
voltages from 1.0 V to 5.5 V.

Please refer to NVT2003/04/06 data sheet (

Ref. 1

) and application note 

AN11127 (

Ref. 2

for more detailed information.

 

a. NVT2003DP (OM13319)

b. NVT2004TL (OM13316)

c. NVT2006PW (OM13323)

Fig 1.

Bidirectional voltage level translators demo boards

019aac708

019aac709

019aac710

Содержание NVT2003DP









Отзывы: