NXP Semiconductors MCIMC7x-SDB, Быстрый старт, Страница: 8 / 12

8
Quick Start Guide
BOOT PROCESS FOR LINUX IMAGE
During the boot process, there will be
operating system status information
scrolling on the terminal window of the
host computer (if connected).
When the boot process is complete,
the Yocto Project
®
operating system will
be displayed on the monitor display
(if connected).
To work from the terminal window on
the host PC, press enter at the terminal
window to get the command prompt.
For the Linux operating system, use
username
root without password to log
in. The Linux image will run on ARM
Cortex-A7 cores. For details to run
FreeRTOS™ on ARM Cortex-M4 core,
please visit
www.nxp.com/iMXtools .
TIPS AND PRECAUTIONS
Input power voltage is suggested to be
5 V. The over-voltage protection circuit
on board will disconnect the power
supply from the system in case the
supply voltage is higher than 5.5 V. The
user must take into account this is the
maximum voltage that can be plugged
into J1.
Proper ESD precautions should be
used when handling the board.
For more options and board details
including connection for EPD (electronic
paper display) panel, LVDS panel and
antenna, please refer to documentation
at
www.nxp.com/iMX7DSABRE