www.nxp.com
7
3
Connect to
Debug UART
Connect the micro-B end of the supplied
USB cable to Debug UART port (J11)
and the other end of the cable to PC
acting as the host terminal. Once the
PC recognizes the virtual USB to UART
device, it can be seen it in your PC
Device Manager list.
There will be 2 ports automatically
configured. The first port will be the
Cortex-A7 core console/debug serial
port, and the second one will be for the
Cortex-M4 core.
Serial port configuration: 115200
baud, 8 data bits, 1 stop bit, no parity.
Note: The PC needs a driver to enable
a virtual COM port through the PC USB
port.
Please consult
www.ftdichip.com/
Documents/InstallGuides.htm
to
download the correct driver.
4
Connect User Interface
Devices (Optional)
Connect monitor via the HDMI connector
(J9). To interact with the user interface
displayed on the monitor it may be desirable
to attach a keyboard and/or a mouse.
5
Connect Power
Supply
Connect 5 V power supply into power
jack J1 and set SW1 to the on position.
When power is connected to the smart
device, the board will automatically begin
the boot sequence configured in Step 2.
Содержание MCIMC7x-SDB
Страница 11: ......