NXP Semiconductors LPCXpresso54102, Руководство пользователя, Страница: 4 / 20

NXP Semiconductors
UM10855
LPCXpresso board for LPC54100 family of MCUs
UM10855_OM1377.docm All information provided in this document is subject to legal disclaimers. © NXP B.V. 2014. All rights reserved.
User manual Rev. 1.0
— 4th November 2014
4 of 19

On-board 1.8/3.3V or external power supply options

Built-in power consumption and supply voltage measurement

UART, I
2
C and SPI port bridging from LPC54102 target to USB via the on-board
debug probe

FTDI UART connector
2.1 Board layout and settings
This section provides a quick reference guide to the main board components,
configurable items, visual indicators and expansion connectors. The layout of the
components on the LPCXpresso54102 board is shown in
Figure 1 below:
P1
JP4
JP3
JP1
JP2
J4
J6
JP5
P3
SW3
SW1
SW2
P2
JP7
JP8 J8
J7
U8
U12
TP1
J3
J5
J1
J2
D1
D2
D3
JP6 D4
Figure 1 Board Layout
The function of each identified component is listed in Table 1.
Table 1 - Board interface components
Designator Description Reference
section
D1 Link2 LPC43xx BOOT0_LED indicator. Reflects the state of
LPC43xx Link2 MCU P1_1. When the boot process fails,
D1 will toggle at a 1 Hz rate for 60 seconds. After 60
seconds, the LPC43xx is reset. 7
D2 Tri-color LED
– Driven by Target LPC54102 MCU. JP6
must be shunted for +3.3V to be applied to D2 anode. The
default shunt for JP6 is a 0Ω resistor installed at JS17.
7
D3 Target LPC54102 Power LED. 7
D4 Target LPC54102 Reset LED
– LED is on anytime the
Target RESETn is pulled low.
7
J1, J2, J7,
J8 Expansion connectors, including Arduino Uno rev3
compatible connectivity. 8