NXP Semiconductors
UM10855
LPCXpresso board for LPC54100 family of MCUs
UM10855_OM1377.docm
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2014. All rights reserved.
User manual
Rev. 1.0
— 4th November 2014
3 of 19
1. Introduction
The LPCXpresso™ family of boards provides a powerful and flexible development
system for NXP's Cortex®-M family of MCUs. They can be used with a wide range of
development tools, including the
NXP’s LPCXpresso IDE. The LPCXpresso54102 board
has been developed by NXP to enable evaluation of and prototyping with the LPC54100
family of MCUs, and is based on the LPC54102J512BD64 version of the MCU.
This document describes the LPC54102 LPCXpresso LQFP board hardware. The
following aspects of interfacing to the board are covered by this guide:
Main board features
Setup for use with development tools
Supporting software drivers
Board interface connector pin out
Jumper settings
Powering the board
Mechanical drawing
2. Feature summary
The LPCXpresso54102 board includes the following features:
On-board, high-
speed USB based, Link2 debug probe with ARM’s CMSIS-DAP
and LPCXpresso IDE Redlink protocol options
Link2 probe can be used with on-board LPC54102 or external target
Support for external debug probes
Tri-color LED
Target Reset, ISP and WAKE buttons
Expansion options based on Arduino UNO and PM
od™, plus additional
expansion port pins