NXP Semiconductors KITFS5600FRDMEVM, Руководство пользователя, Страница: 6 / 14

NXP Semiconductors
UM11526
KITFS5600FRDMEVM evaluation board
5.2.1 Jumpers
Figure 2. Evaluation board jumper/switch locations
Name Default Description
J3 2-3 shorted Controls EN1 source
•
1-2 shorted → From Freedom board
• 2-3 shorted → From onboard switch
J4 2−3 shorted Controls EN2 source
• 1-2 shorted → From Freedom board
• 2-3 shorted → From onboard switch
J5 1−2 shorted MODE logic level control
• 1-2 → Ground
• 2-3 → VDDIO
J8 2−3 shorted FS0B pull up source
• 1-2 → VIN
• 2-3 → VDDIO
J12 1−2 shorted GPIO2/VMON3 selection
•
1-2 → GPO2
• 3-4 → FCCU1
• 5-6 → Ground
• 7-8 → VMON3
J13 1−2 shorted GPIO3/VMON4 selection
• 1-2 → GPO3
• 3-4 → FCCU2
• 5-6 → ERRMON2
• 7-8 → VMON4
Table 1. Evaluation board jumper/switch descriptions
UM11526 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
User manual Rev. 1 — 25 May 2021
6 / 14