NXP Semiconductors KITFS5600FRDMEVM, Руководство пользователя, Страница: 4 / 14

NXP Semiconductors
UM11526
KITFS5600FRDMEVM evaluation board
4.3 Windows PC workstation
This evaluation board requires a Windows PC workstation. Meeting these minimum
specifications should produce great results when working with this evaluation board.
•
USB-enabled computer with Windows 7 or Windows 10
4.4 Software
Installing software is necessary to work with this evaluation board. All listed software
is available on the evaluation board's information page at http://www.nxp.com/
KITFS5600FRDMEVM .
5 Getting to know the hardware
5.1 Kit overview
The KITFS5600FRDMEVM is a hardware evaluation tool that allows performance test of
the FS5600.
An Emulation mode is possible to test different OTP configurations as needed. Different
inductors and MOSFETs are included in the kit to allow the user to try different switching
frequencies.
5.1.1 KITFS5600FRDMEVM features
• VBAT power supply connectors
• SW1 output capability up to 3.5 A (internal MOSFET)
• SW2 output capability up to 15 A (external MOSFET)
•
EN1/2 switches
• PGOOD1/2 status indicators
• FS0B external safety pin
• LEDs that indicate signal or regulator status
•
Emulation mode capabilities
• USB connection and GUI for register access, OTP emulation and programming
5.2 Kit featured components
Figure 1 identifies important components on the board.
UM11526 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
User manual Rev. 1 — 25 May 2021
4 / 14