manualshive.com logo in svg

NXP Semiconductors K53 Series, Справочное руководство

"Серия микросхем NXP Semiconductors K53 - это набор продуктов высокого качества для различных приложений. Справочное руководство доступно для бесплатного скачивания на нашем веб-сайте. Загрузите его сейчас, чтобы получить всю необходимую информацию для использования продукта."

Поделиться
Скачать
background image

How to Reach Us:

Home Page:

www.freescale.com

Web Support:

http://www.freescale.com/support

USA/Europe or Locations Not Listed:

Freescale Semiconductor
Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284
+1-800-521-6274 or +1-480-768-2130
www.freescale.com/support

Europe, Middle East, and Africa:

Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
www.freescale.com/support

Japan:

Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku,
Tokyo 153-0064
Japan
0120 191014 or +81 3 5437 9125
[email protected]

Asia/Pacific:

Freescale Semiconductor China Ltd.
Exchange Building 23F
No. 118 Jianguo Road
Chaoyang District
Beijing 100022
China
+86 10 5879 8000
[email protected]

For Literature Requests Only:

Freescale Semiconductor Literature Distribution Center
1-800-441-2447 or +1-303-675-2140
Fax: +1-303-675-2150
[email protected]

Document Number: K53P144M100SF2RM
Rev. 6, Nov 2011

Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductors products. There are no express or implied
copyright licenses granted hereunder to design or fabricate any integrated circuits or
integrated circuits based on the information in this document.

Freescale Semiconductor reserves the right to make changes without further notice to any
products herein. Freescale Semiconductor makes no warranty, representation, or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of any
product or circuit, and specifically disclaims any liability, including without limitation
consequential or incidental damages. "Typical" parameters that may be provided in
Freescale Semiconductor data sheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating parameters,
including "Typicals", must be validated for each customer application by customer's
technical experts. Freescale Semiconductor does not convey any license under its patent
rights nor the rights of others. Freescale Semiconductor products are not designed,
intended, or authorized for use as components in systems intended for surgical implant
into the body, or other applications intended to support or sustain life, or for any other
application in which failure of the Freescale Semiconductor product could create a
situation where personal injury or death may occur. Should Buyer purchase or use
Freescale Semiconductor products for any such unintended or unauthorized application,
Buyer shall indemnify Freescale Semiconductor and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and
reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury
or death associated with such unintended or unauthorized use, even if such claims alleges
that Freescale Semiconductor was negligent regarding the design or manufacture of
the part.

RoHS-compliant and/or Pb-free versions of Freescale products have the functionality and
electrical characteristics as their non-RoHS-complaint and/or non-Pb-free counterparts.
For further information, see http://www.freescale.com or contact your Freescale
sales representative.

For information on Freescale's Environmental Products program, go to
http://www.freescale.com/epp.

Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc.
All other product or service names are the property of their respective owners.

© 2011–2012 Freescale Semiconductor, Inc.

Содержание K53 Series
































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для K53 Series

Daikin ALTHERMA User Manual preview
ALTHERMA
Бренд: Daikin Страницы: 5
Lawler 804 Installation & Maintenance Manual preview
804
Бренд: Lawler Страницы: 5
Samson 3730-6 Mounting And Operating Instructions preview
3730-6
Бренд: Samson Страницы: 124
Samson TROVIS 5500 Operating Instructions Manual preview
TROVIS 5500
Бренд: Samson Страницы: 86
VAC V100 Troubleshooting Manual preview
V100
Бренд: VAC Страницы: 5
Lab.gruppen LAB.LEVEL4 Quick Start Manual preview
LAB.LEVEL4
Бренд: Lab.gruppen Страницы: 2
Matelec FPC-36040 Owner'S Operation Manual preview
FPC-36040
Бренд: Matelec Страницы: 16
Olsen 58468 Owner'S Manual & Safety Instructions preview
58468
Бренд: Olsen Страницы: 4
ZKTeco LockerPad-7B User Manual preview
LockerPad-7B
Бренд: ZKTeco Страницы: 27
Sunlight Supply TITAN CONTROLS KRONUS 2 Instruction Manual preview
TITAN CONTROLS KRONUS 2
Бренд: Sunlight Supply Страницы: 4
C-TEC QT601-2 Installation And Programming Manual preview
QT601-2
Бренд: C-TEC Страницы: 42
Salus PC12HW Manual preview
PC12HW
Бренд: Salus Страницы: 2
LevelOne WAB-8011 Quick Installation Manual preview
WAB-8011
Бренд: LevelOne Страницы: 11
Lattice Semiconductor MachXO5T-NX Quick Start preview
MachXO5T-NX
Бренд: Lattice Semiconductor Страницы: 2
M-system SC100 Series User Manual preview
SC100 Series
Бренд: M-system Страницы: 24
SMC Networks LEC Series Operation Manual preview
LEC Series
Бренд: SMC Networks Страницы: 50
Oracle SGSN06 User Manual preview
SGSN06
Бренд: Oracle Страницы: 76
Zamel exta life ROB-21 Instructions Manual preview
exta life ROB-21
Бренд: Zamel Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды