NXP Semiconductors i.MX6UltraLite, Быстрый старт

Страница: 20 / 21

NXP Semiconductors
AN12397
EdgeLock
TM
SE050 Quick start guide with i.MX6UltraLite
AN12397 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2019. All rights reserved.
Application note Rev. 1.2 — 17 December 2019
534512 20 / 21
Figures
Fig. 1. Arduino connectors of OM-SE050ARD and
i.MX6UltraLite boards ........................................4
Fig. 2. Jumper configuration for i.MX6UltraLite
board ................................................................. 4
Fig. 3. Micro-SD card preparation with Win32 Disk
Imager software ................................................ 6
Fig. 4. Plug the power supply and connect the USB
cable to your laptop .......................................... 7
Fig. 5. Check i.MX6UltraLite board is recoginized in
Device Manager ................................................ 8
Fig. 6. Open a TeraTerm serial connection ..................9
Fig. 7. Configure TeraTerm serial port connection ....... 9
Fig. 8. Insert the Micro-SD card ................................. 10
Fig. 9. Configure i.MX6UltraLite board switches ........ 10
Fig. 10. Turn on the board ........................................... 11
Fig. 11. Sign in in the OS ............................................ 12
Fig. 12. Go to the EdgeLock SE050 Plug & Trust
middleware test example directory ..................13
Fig. 13. Run se05x_minimal test example ................... 13
Fig. 14. List EdgeLock SE050 Plug & Trust
middleware test examples ...............................14
Fig. 15. Start the ssscli tool ..........................................15
Fig. 16. Close an already openned session ................. 16
Fig. 17. ssscli info .........................................................16
Fig. 18. ssscli disconnect ............................................. 17