NXP Semiconductors Freescale MCIMX6Q-SL Скачать руководство пользователя страница 8

Страница: 8 / 37

MCIMX6Q-SL: Development platform for i.MX 6Quad

Built to Freescale®

SABRE Lite design

Doc ID: MCIMX6QSLUM

Rev. 0.9, 11/12/2012

Embest and element14 are trademarks of Premier Farnell plc

Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off.

Quick Start Guide

This section describes how to use the SABRE Lite and associated components.

2.1

Unpacking the Kit

The SABRE Lite development kit is shipped with the items listed in Table 2-1. Remove the circuit board

from the conductive bag and perform a visual inspection.

Table 2-1 SABRE Lite Kit Contents

2.2

Web-Based Contents

Please refer to

www.element14.com/iMX6

for the latest documents and software, including:

Schematics

Board layout

Bill of Materials (BOM)

Board Support Packages (BSPs)

2.3

Setting Up the System

2.3.1

Insert MicroSD Card

Insert the supplied MicroSD card into the board’s MicroSD card socket J20.
Note: MicroSD Card is included if ready at the date your kit was shipped.
For the latest version of the BSP, please visit

www.element14.com/iMX6

Item

Description

Circuit Board

SABRE Lite board

USB cable

Micro-B to standard-A cable

RS-232 cable

Custom serial cable

Serial Cable

Crossover cable – DB9 female to DB9 female

Ethernet cable Crossover cable to connect the board to host computer

Power Supply

5Vdc @ 4 A power supply

Documentation Quick-Start Guide

MicroSD Card

The kit includes a MicroSD Card pre-loaded with the Linux BSP from TimeSys

Содержание Freescale MCIMX6Q-SL






































Результаты поиска

Содержание Freescale MCIMX6Q-SL

Отзывы:

Похожие инструкции для Freescale MCIMX6Q-SL

Бренды по названию

Популярные бренды

NXP Semiconductors Freescale MCIMX6Q-SL, Руководство пользователя

Результаты поиска

Содержание Freescale MCIMX6Q-SL

Отзывы:

Похожие инструкции для Freescale MCIMX6Q-SL

Бренды по названию

Популярные бренды