NXP Semiconductors FRDM-24XSMBEVB, Руководство пользователя, Страница: 4 / 21

NXP Semiconductors
KTFRDM24XS4EVBUG
24 V multipurpose low R
DS(on)
eXtreme switch evaluation board user guide
KTFRDM24XS4EVBUG All information provided in this document is subject to legal disclaimers. © NXP B.V. 2017. All rights reserved.
User guide Rev. 1 — 22 May 2017
4 / 21
Jump start bundles are available on each tool summary page with the most relevant and
current information. The information includes everything needed for design.
3.4 Required equipment
This kit requires the following items:
• 3/16-inch blade screwdriver for connecting the cables
•
DC power supply: 5.0 V to 36 V with up to 20 A current handling capability, depending
on load requirements
• Typical loads (DC motor, bulbs, power resistors or inductive load with 20 A and 36 V
maximum operation)
• One of the following Freedom boards for SPI communication, configuration and control:
– KL25Z
–
KV10Z
– K64F
• SPIGen software v7; see http://www.nxp.com/SPIGEN
3.5 System requirements
The kit requires the following to function properly with the different hardware:
• USB-enabled PC with Windows XP or higher
4 Getting to know the hardware
4.1 Board overview
The FRDM-24XSMBEVB associated with an expansion board, is an evaluation kit that
exercises all the functions of the different devices from MC24XS4 family. It can be
associated to each of the devices from this family. These devices are differentiated by
their power channel R
DS(on)
. Each device has two power outputs that can be parallelized.
Its usage and control is only feasible through the hardware interface.