NXP Semiconductors
KTFRDM24XS4EVBUG
24 V multipurpose low R
DS(on)
eXtreme switch evaluation board user guide
KTFRDM24XS4EVBUG
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2017. All rights reserved.
User guide
Rev. 1 — 22 May 2017
13 / 21
5.1 Installing SPIGen freeware on your computer
The latest version of SPIGen is designed to run on Windows 8, Windows 7, Vista or
XP‑based
operating system.
To install the software, go to
http://www.nxp.com/FRDM-24XSMBEVB-Downloads
.
Locate and click jump start your design.
1. Download the SPIGen software as well as the associated configuration file.
2. Run the installed program from the desktop. The installation wizard conducts the rest
of the process.
3. To use SPIGen, go to the Windows start menu, programs, SPIGen, and then click the
SPIGen icon. The SPIGen graphic user interface (GUI) appears.
4. Go to the file menu in the upper left-hand corner of the GUI, and select open. Browse
for the configuration file that was saved on the desktop earlier with the jump-start
option and select it (FRDM-24XS4-SW.spi), then click open.
presents some basic SPI commands for quick evaluation
of devices from MC24XS4 family, in addition with access to I/Os with extra pins.
The commands are sent once (single command) or continuously in a loop (batch
command).
Figure 7. SPIGen GUI