NXP Semiconductors EasyEVSE EV, Руководство пользователя

Страница: 12 / 64

Chapter 3
Required hardware
The hardware required to assemble, wire, and run the EasyEVSE is as follows:
• i.MX RT1060 or i.MX RT1064 EVK
• Edge lock SE050 development board
• TWR-KM35Z75M, TWR-KM34Z75M, or TWR-KM34Z50M board
• CLEV6630ARD
• RK043FN02H-CT 4.3-inch TFT 480*272 LCD
• Miscellaneous hardware: cable jumpers, Ethernet LAN cable, and NFC cards
Note that the EasyEVSE was not tested with different hardware.
3.1 Part ordering details
Table 1 provides information about the required parts to buy for the EasyEVSE.
Only one i.MX RT 106x and one TWR-KM3x board variants are required in the platform. It is not necessary to order
and implement all the board options.
NOTE
Table 1. EasyEVSE required parts
Required part Product page Description Picture
i.MX RT106x EVK IMXRT1060-EVK MIMXRT1060-EVK low-cost evaluation
kit for Cortex-M7
MIMXRT1064 MIMXRT1064-EVK low-cost evaluation
kit for Cortex-M7
Edge lock SE050
development board OM-SE050ARD SE050 Arduino compatible
development kit
TWR-KM3x TWR-KM35Z75M KM series Tower System Module for
KM35 MCUs
Table continues on the next page...
NXP Semiconductors
NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022
User Guide 12 / 64