DEMO9S12PFAME User's Manual
Click the
“Finish”
button to exit from the
“Found New Hardware Wizard”
procedure.
9.
The Demonstration Board’s USB driver is now installed on your system.
4.2 Power Supply
The Demonstration Board can be powered in three ways:
12 V DC input connector;
USB connector;
I/O header connector.
The “POWER SEL” jumper allows you to power the board through either the 12 V DC input
connector or the USB connector.
When using the I/O header connector, its pin 1 is connected to the VDD line of the carrier
board through the “VAUX ENA” jumper.
Page 13