DEMO9S12PFAME User's Manual
4 Hardware Setup
4.1 First Connection
The Demonstration Board connects to a host PC through a USB port. Connection steps are
listed below in the recommended flow order:
1.
Install all the required system software as described in the previous section.
2.
Make sure the “POWER SEL” jumper is in the “USB” position.
3.
Insert one end of the USB cable into a free USB port.
4.
Insert the other end of the USB cable into the USB connector on the Demonstration
Board.
5.
The first time the Demonstration Board is connected to the PC, Windows recognizes the
instrument and starts the
“Found New Hardware Wizard”
procedure, asking you to
specify the driver to use for the instrument. On Windows XP (SP2) the following dialog
box will appear.
Select the
“No, not this time”
option and click the
“Next >”
button.
6.
The following dialog box will appear.
Page 11