manualshive.com logo in svg

NXP Semiconductors 56858, Руководство пользователя

Поделиться
Скачать
NXP Semiconductors 56858 Скачать руководство пользователя страница 13

Introduction, Rev. 3

Freescale Semiconductor

1-1

Chapter 1

Introduction

The 56858EVM is used to demonstrate the abilities of the 56858 and to provide a hardware tool 
allowing the development of applications that use the 56858.

The 56858EVM is an evaluation module board that includes a 56858 part, 16-bit stereo codec, 
USB 1.1/2.0 interface, external memory and a daughter card expansion interface.  The daughter 
card expansion connectors are for signal monitoring and user feature expandability.

 The 56858EVM is designed for the following purposes:

•

Allowing new users to become familiar with the features of the 56800E architecture. The 
tools and examples provided with the 56858EVM facilitate evaluation of the feature set 
and the benefits of the family.

•

Serving as a platform for real-time software development. The tool suite enables the user 
to develop and simulate routines, download the software to on-chip or on-board RAM, run 
it, and debug it using a debugger via the JTAG/Enhanced OnCE (EOnCE) port.  The 
breakpoint features of the EOnCE port enable the user to easily specify complex break 
conditions and to execute user-developed software at full speed until the break conditions 
are satisfied.  The ability to examine and modify all user-accessible registers, memory and 
peripherals through the EOnCE port greatly facilitates the task of the developer.

•

Serving as a platform for hardware development. The hardware platform enables the user 
to connect external hardware peripherals.  The on-board peripherals can be disabled, 
providing the user with the ability to reassign any and all of the controller's peripherals.
The EOnCE port's unobtrusive design means that all memory on the board and on the chip 
is available to the user.

Содержание 56858





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды