NWA Gates KP-1050, Руководство пользователя

Страница: 3 / 8

IMPORANTANT NOTICE
If using the keypad with a mechanically operated gate or door, mount at
least 10 feet away from gate. To prevent users from being crushed or
pinned. Failure to do so may result in injury or death.
Use 18AWG wire for all of the connections. Failure to do so may damage the keypad.
All wiring should be done by a professional installer to risk of improper installation
Always disconnect power before making any connections or servicing the keypad.
The keypad must be properly grounded.
Reset Unit:
There is a small jumper on the back side of the PC board
1.Power Down
2. Place Jumper in the restore position
3. Power Up
4. Replace Jumper in the original position at sound of tone
All settings are back to factory defaults.
1
Power Down
Move System Restore
Jumper
1
2
2
Power Up
Key Tone
Move Jumper Back
1
2
3