NWA Gates KP-1050, Руководство пользователя

Страница: 4 / 8

Quick Programming Guide - KP-1050 Keypad
1. Set Up a Entry Code
：
To test the unit the factory entry code 3333 is already in keypad
1 0 5
2 5
2
Enter the master code twice Chime Tone User Code
New Entry Code
1 2 3 4
*
1 2 3 4
#
Exit
2. Delete a Entry Code:
Entry codes are set to a user code 01-19 that activates the momentary relay, the example above is for user number
one. The next entry code would be 1234 1234
*02 next entry code then # The next would be 1234 1234 *03 next
entry code then #
5 0
Enter the master code twice Programming #
1 2 3 4
*
1 2 3 4
#
Exit
0 1
User Code
6. Relay 1 Strike Time:
2 0 #
Enter the master code twice Programming # Seconds (1 beep)
1 2 3 4
*
1 2 3 4
Press 05 will set the relay strike to 5 seconds, Press 08 will set the relay strike to 8 seconds, 01 for 1 second up
Exit
5. Change Master Code:
0 0
Enter the master code twice
Programming #
New Master Code
1 2 3 4
*
1 2 3 4
#
Exit
Current Master Code Current Master Code (chime tone up) *00 New 4 digit Master Code # (chime tone down)
To change the master code to 4321:- 1234 1234 *00 4321 #
3. Enter a Toggle or Hold Open Code:
Relay 2 or aux output must be connected
4 0
#
Enter the master code twice
Programming # New Hold Open Code Exit
1 2 3 4
*
1 2 3 4
To Change a Toggle / Hold Open Code. Just enter new code
4. Activating Hold Open
When the Hold Open code is entered the relay latches on until the Hold Open code is re-entered.
To program a entry code of 2525 enter the following
If your entered 2525 as your code and wanted to delete 2525 you would enter (1234 1234 *50 01 wait for tone then #)
The next entry code to be deleted (1234 1234 *50 02 wait for tone then # ) The next would be (1234 1234 *50 03
wait for tone then # )
To Delete all Entry Codes
You would enter (1234 1234 *50 00 wait for tone #)