NW Global Vending Festival, Установка - Использование - Обслуживание

Страница: 29 / 60

© by N&W GLOBAL VENDING S.p.A.
23
03-2012 3775 00
t
ubEs miNimum lEvEl
This allows the user to be notified with the message “In -
sert exact amount”, adding a number of coins between 0
and 15 to the programmed number of coins for determin-
ing the full status of the tubes.
vmc
frEE salE
Most of the payment systems with BDV protocol manage
the free sale function.
Nevertheless, there are payment systems which do not
have this function.
In this case, having to dispense some selections free of
charge, it is necessary to enable the VMC free sale (vending
machine control, enabled by default) and set the price of
these selections to zero.
mDb
The MDB protocol menus allow you to define the follow -
ing functions.
i
mmEDiatE cHaNgE
Usually the amount related to a selection is cashed in
after the machine sends the signal “Selection made”.
By enabling this function, which is disabled by default, the
payment signal is sent at the beginning of the dispensing.
Setting this parameter is compulsory.
D
Ecimal poiNt
Pressing the confirmation key
�
displays the position of
the decimal point, in particular:
0 decimal point disabled
1 XXX.X (one decimal place)
2 XX.XX (two decimal places)
3 X.XXX (three decimal places)
By pressing the confirmation key
�
, these values flash and
they can be modified.
Setting this parameter is compulsory.
t
ypE of DispENsiNg
This allows you to set the operating mode for multiple or
single dispensing. With multiple dispensing, the change
is not automatically returned at the end of one dispens-
ing, but it remains available for further dispensing. When
the coins return button is pressed (if the function is
enabled), the remaining credit will be returned up to the
maximum change value.
o
bligatioN to buy
This allows the enabling/disabling of the coins return
button before dispensing a product.
-ON: the change is returned after a product has been
selected
-OFF: the change is returned immediately when the coins
return key is pressed (the machine works as change ma-
chine)
m
aximum crEDit
This function allows you to define the maximum credit for
the introduced coins which is accepted.
m
aximum cHaNgE
It is possible to set a limit to the total amount of the
change that the coin box will pay when the change re-
turn button is pressed or after a single dispensing.
Any credit exceeding the programmed amount with this
function will be cashed in.
Accepted coins
It is possible to define which coins among those recognised
by the validator shall be accepted when the coin return
tubes are full.
In relation to the coin/value correspondence, the configura -
tion of the coin box needs to be checked
a
ccEptED coiNs
It is possible to define which coins among those recog -
nised by the validator shall be accepted when the coin
return tubes are full.
In relation to the coin/value correspondence, the configura -
tion of the coin box needs to be checked
c
oiNs rEturNED
It is possible to define which coins among those availa -
ble in the tubes shall be used for giving the change. This
parameter is only active with coin boxes which do not
automatically manage the choice of the tube to be used
(Auto changer payout).
In relation to the coin/value correspondence, the configura -
tion of the coin box needs to be checked
a
ccEptED baNkNotEs
It is possible to define which coins among those recog -
nised by the validator shall be accepted.
In relation to the banknote/value correspondence, the
configuration of the reader needs to be checked