TECHNICAL SPECIFICATIONS
Network Video Technologies
(+1) 650.462.8100 • +44 (0) 208 977-6614
nvt.com • [email protected]
Page 13 of 14
R J 4 5 E T H E R N E T I N T E R F A C E S (4 each)
Connectivity: 10/100/1000 BaseT IEEE 802.3ab
auto-negotiation, auto MDI / MDX crossover
PoE Power: This Power Sourcing Equipment (PSE) detects and
supports Powered Devices (PDs) that are compatible
with IEEE 802.3af or 802.3at, or PDs that draw up to
50 watts. For maximum power distance, 56VDC
appears on all eight RJ45 pins*.
Protection: Industrial transient protection
Thermistor current protection
Wire type: Cat5 or better
Distance: up to 328 feet (100m)
T B u s L I N K I N T E R E R F A C E
Connectivity: BNC or RJ45
Wire type: Coax, single- or multi-pair UTP, 18/2, or STP wire
Impedance: 25 to 100
Ω
Topology: Bus architecture supports star, daisy-chain, or any
combination. One control-room Receiver may
support multiple remote TBus Transmitters.
Data throughput: 150 Mbps total network bandwidth*
with dynamic bandwidth allocation
Latency: 3 mS
Wire distance: Up to 8,000 feet, 1.5 miles (2.5 Km)*
Transmission technology: IEEE 1901
Wire distance: Up to 8,000 feet, 1.5 miles (2.5 Km)*
Encryption: 128-bit AES, through one-button Joining
* I M P O R T A N T N O T E :
Data rate, distance, and number of devices may be lower due to wire
voltage-drop, power supply capacity, or signal attenuation.
See pages 7 & 8.
W A R N I N G :
For safety, never use more than two power supplies within a TBus
channel. Never use more than one 60 watt remote power supply on
each TBus channel.
R E G U L A T O R Y
UL Listed to IEC/UL 60950-1
Complies with FCC part 15A limits
W A R R A N T Y
Limited Lifetime
Specifications subject to change without notice.
L E D S T A T U S I N D I C A T O R S
M E C H A N I C A L / E N V I R O N M E N T A L
Body Dimensions: 6.00 in (152 mm) wide
1.39 in (35 mm) high
4.40 in (112 mm) deep
excluding connectors
Shipping weight: 1.20 lb (0.54 Kg)
Operating / storage temperature: -40°F to 185°F (-40°C to +85°C)
20 to 85% relative humidity
non-condensing
Power consumption:
≤
3W
Generated heat: 10 BTU/hour
Transient immunity: 5 x 20µS 3,000A, 6,000V
ESD 20KV, 200pF
P O W E R S U P P LY
Power is usually supplied by the TBus Receiver. For optional supplemental
local power, an additional class 2 power supply may be purchased. These
supplies are external inline, with an IEC380-C14 power inlet and a 6 ft
(1.18 m) line cord. Input voltage is 100~240VAC 50/60Hz. A molded P1J
5.5mm barrel connector provides a class 2 (SELV) regulated output.
Model NV-PS56-60W: 56V 60W
4.90 in (124 mm) long
2.00 in (51 mm) wide
1.25 in (32 mm) high, 0.67 lbs (300 g)
Model NV-PS56-90W: 56V 90W
5.77 in (147 mm) long
2.36 in (60 mm) wide
1.27 in (32 mm) high, 0.94 lb (430 g)
Operating / storage temperature: -40°F to +185°F (-40°C to +85°C)
20 to 5% relative humidity
non-condensing
Transient Immunity: 5x20µS 3000A, 6000V
ESD 20KV, 200pF
Use only the power cord provided with the unit or equivalent UL approved
type SPT-2, SVT, or SJT 18/3 AWG 100~240 VAC, 1 Amp 60°C max 15 ft
(4.5 m) long. One end with IEC380-C13 appliance coupler and the other
end with NEMA 1015P or equivalent for your country.
Flashes
when
initializing
or Joining
Green = good
Amber = fair
Red = poor
Link Quality
Remote
device
detected
Link
Green = good
Flashes
with Data
Data
Green = PoE
device
connected
PoE
Power
56VDC
JOIN
50W
PoE
NV-ET1804 Ethernet Transmitter
Network Video Technologies
Link
Link
Quality
(no Ethernet, no analog)
Data 1 PoE
Data 4 PoE
Data 3 PoE
Data 2 PoE
10/100 PoE+
