• 100 BaseT transmision; Network speeds up to 150 Mbps*; Up to 8,000ft (2,500m)*
• Powers a PoE, PoE+, or High Power PoE camera (or other PoE device), up to 50 watts*
• Use with another NV-ET1801 or another TBus Receiver
• One TBus receiver at the network-end can support multiple remote Transmitters/IP cameras
• 56 VDC is distributed over the TBus to all connected equipment
• Easy configuration, no PC required
• Transparently supports all networking protocols (UDP, TCP/IP, HTTP, Multicast*, etc.)
• 128-bit AES encrypted transmission; Built-in transient protection
• Limited lifetime warranty
The NVT Model NV-ET1801 TBus Single Port PoE+ Transmitter is a compact media converter that
allows 10/100 BaseT Ethernet and PoE+ power to be transmitted using virtually any kind of cable.
These devices are often used in legacy installations where existing cable is re-deployed as part
of an upgrade to IP cameras. 56 VDC class 2 power is delivered to one transceiver, which dis-
tributes it to multiple* remote transmitters, and their PoE, PoE+, or High Power PoE cameras*.
These transceivers are extremely simple to use, with no IP or MAC addressing required. Status
LEDs indicate power, Ethernet/PoE, and TBus connectivity/activity/quality. They are backed by
NVT’s award winning customer support and limited lifetime warranty.
* Distance and number of devices supported may be lower due to power supply capacity and wire voltage-drop. See Wire Distance Charts on page 9. Aggregate TBus band-
width is dynamically allocated (shared based on traffic), and decreases with wire distance. See Wire Distance Chart on page 9. Multicast requires an IGMP Querier, either in a
network switch, or within the NV-ER1808i or NV-ER1816i Receiver Hub. High bandwidth streaming devices (>15Mbps) that employ unusually “chatty”protocols (TCP/IP, TFTP,
etc.) are not recommended. Use RTP/UDP instead.
Page 2 of 15
PRODUCT OVERVIEW
Network Video Technologies
(+1) 650.462.8100 • +44 (0) 208 977-6614
nvt.com • [email protected]
Single Port PoE+ Transmitter
Model NV-ET1801
10/100
Po
E+
No
Ethernet,
No
Ana
log
56V
DC
