992455-3-ba.doc
Erstellt: 07.12.07
Geändert: na / 26.08.08
euroMOT – Pilatusstrasse 36 CH 5630 Muri www.euromot.ch
Visum:
Seite 1/ 2
Coding manual: for awning professionals
Hand transmitter cM100 K4 SW for all receiver types from euroMOT
(
Document Nr.992455-3-ba / Release: 3.00EN*)Art. No. 490455
*With this document version, all earlier versions lose their validity. euroMOT endeavours to improve these documents constantly.
However, we assume no liability for any existing errors or their consequences.
The cM100 K4 SW 4 channel hand transmitter with automatic on/off function is suitable for the
commandMot series, solvento series and powerFlex radio-controlled motors. It can also be used to
control components of the BUS system, using the BuBu-fk radio node. The radio frequency is 433.92
MHz.
1.0
Description :
•
Use the slide switch (black) to select the level.
Slide switch left:
1. Level for channels 1 – 2 and Man/Auto command
Slide switch right: 2. Level for channels 3 – 4 and Man/Auto command
The Manual/Auto command is required for systems with cM1000 sun-wind
automatic.
The code switches for coding the hand transmitter are underneath the
battery cover.
•
Slide switch for selecting levels:
Pos. left
Pos. right:
channel 1
channel 3
channel 2
channel 4
Man/Auto 1*
Man/Auto 2** extend retract auto manual
•
LED lights when a button is pressed, if the battery is still good. If it no longer
lights, check or change the battery.
•
The battery rating is: 12 V (type A23). Used batteries must be disposed of in
compliance with national regulations.
2.0
Coding the hand transmitter
•
Slide the group selection switch to the left (for coding the 1
st
level for
channels 1 – 2 and Man/Auto 1*).
•
Slide the teach-in DIP switch 1 to ON (coding mode).
•
Set an individual code (code switches 1 – 7) and enter it into the list
on the left.
+
0
-
1 2 3 4 5 6 7 8 9 ON
+
0
-
ENTER THE CODE AND WRITE IT DOWN!
ON
GB
