992455-3-ba.doc
Erstellt: 07.12.07
Geändert: na / 26.08.08
euroMOT – Pilatusstrasse 36 CH 5630 Muri www.euromot.ch
Visum:
Seite 2/ 2
•
To teach in the code for the 1
st
level (channels 1 and 2; Man/Auto 1*), press
and hold any grey operating button for 1 second
•
Slide the group selection switch to the right (for coding the 2nd level for
channels 3 – 4 and Man/Auto 1*).
•
Set a new individual code (code switches 1 – 7)
Careful: At least two coding switches must be set!
Enter this new code also into the list on the left
•
To teach in the code for the 2
nd
level (channels 3 and 4; Man/Auto 2**), press
and hold any grey operating button for 1 second.
•
Once you are finished setting the code, you must slide the teach-in DIP
switch on the bottom right into its down position!!
•
Slide the group selection switch to the right
•
Slide the teach-in DIP switches 1 & 2 to ON (coding mode).
•
Set the same code (code switches 1 – 7) as previously chosen for
the 1
st
level, and draw it into the diagram on the left.
•
To teach in the code (Man/Auto 1*), press and hold the automatic
operation button for 1 second.
•
Once you are finished setting the code, you must slide both teach-
in DIP switches on the bottom right into their down position!!
ON
+
0
-
1 2 3 4 5 6 7 8 9 ON
+
0
-
ON
+
0
-
1 2 3 4 5 6 7 8 9 ON
+
0
-
If you want to control 4 different awning groups (channels 1 – 4) and also teach in the same
Man/Auto command 1* on both levels, you must proceed as described below.
ON
We hereby declare that the radio devices of the product series commandMot comply with the fundamental requirements and
relevant regulations of Directive 1999/5/EC and may be employed in all states of the EU and Switzerland without
registration. They may only be employed for controlling awnings. Declaration of conformity under www.euromot.ch.
