304 Challenger
Series |
7
7�
Manufacturer’s liability shall not be enforceable for any
product until National Vacuum Equipment, Inc� has been paid
in full for such product�
8�
Except to the extent expressly stated herein, manufacturer’s
liability for incidental and consequential damage is hereby
excluded to the full extent permitted by law�
9�
Manufacturer’s liability as stated herein cannot be altered
except in writing signed by an officer of National Vacuum
Equipment, Inc�
10� Certain products provided by National Vacuum Equipment,
Inc� are covered by their respective manufacturer’s
warranties (e�g�, engines used in the NVE engine drive
packages)� These products are not covered by the National
Vacuum Equipment, Inc� Manufacturer’s Warranty�
11� Final assemblers responsibility� NVE goes to great lengths
to insure the quality and proper functionality of the products it
supplies� Many products we supply are purchased for resale
or are impossible or impractical to test prior to the installation
of the item in a vacuum system� It is therefore the
responsibility of the final assembler to thoroughly test the
vacuum system and components supplied to the assembler
by NVE prior to the delivery of the final product to
the end user�
12� NVE is not responsible for pump coupling tightness or
alignment� Customer needs to inspect periodically to ensure
proper alignment and to check tightness of set screws�
Any items found to be defective after delivery to the end user that
should have been discovered prior to delivery will qualify for
replacement of the defective part only with absolutely no
compensation for outside labor or travel expenses� Any subsequent
damage to other components caused by the defective part will be the
sole responsibility of the assembler�
www.fraserwoods.ca
