![Nuvoton NuMicro NuMaker-HMI-MA35D1-S1 Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/nuvoton/numicro-numaker-hmi-ma35d1-s1/numicro-numaker-hmi-ma35d1-s1_user-manual_1720365015.webp)
NuMaker-HMI-MA35D1-S1
Nov. 2, 2022
Page
15
of 99
Rev 1.01
N
UMA
K
E
R
-HMI
-M
A
3
5D1
-S1
U
S
E
R M
A
NU
A
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
2
FEATURES
2.1
NuMaker-SOM-MA35D16A81 Features
Target Chip: MA35D16A887C (BGA 312-Ball) MCP package with DDR3L (256 MB), which
can run up to 800 MHz
Power
–
DC 5V input from the NuMaker-BASE-MA35D1B1 board through the SOM high speed
connector
–
PMIC DA9062-3A:
Four DC/DC: To supply 1.2V Core power, 1.2V CPU power, 1.35V DDR3L Memory
power and 3.3V I/O power
Four LDO: To supply 3.0V RTC power, 1.8V I/O power, 2.5V PLL power and
3.3V/1.8V eMMC NAND Flash power
–
Battery input header (J48): Independent DC 3.3V input to V
BAT
for RTC power (Optional)
Memory Devices
–
An on-board eMMC NAND Flash memory device (16 GB)
Two Gigabit Ethernet (RGMII) PHY devices
Two 120-pin high speed connectors to connect with NuMaker-BASE-MA35D1B1 board
One PMIC reset key button
2.2
NuMaker-BASE-MA35D1B1 Features
Power:
–
5V/2A Power Jack and Slide Switch
Debug/Trace:
–
UART0 debug port: USB Virtual COM (VCOM) port
–
Debug/Trace ports: SWJ (JTAG+SWD), ETM and SWD connectors
Memory Devices
–
An on-board Quad SPI NAND Flash device (512 MB)
–
An on-board NAND Flash device (1 GB)
–
Standard-SD (SD2.0) memory card slot
One power-on setting DIP-Switch for evaluation booting source selection
Two 120-pin high speed connectors to connect with NuMaker-SOM-MA35D16A81 board
Two sets of Gigabit Ethernet ports: Two Gigabit Ethernet transformer devices and two RJ45
port connectors
Two sets of high speed USB ports: One Host/Device port and one Host port
Two camera capture (CMOS sensor) header connectors
One LCM connector to connect with 7’’ 1024x600 LCD daughter board
One audio codec with microphone input and speaker output
One SIM card slot
One External Bus Interface (EBI) header connector