4
Cartridge Replacement
1. Turn black top to By-Pass or Off (By-Pass will allow water to continue
to flow to the rest of the house while you replace the Cartridge). Use the
Wrench provided if necessary.
2. Turn the bottom blue Collar counter clockwise and slide down to
bottom of the Housing. (Be sure to firmly support the Housing as you
loosen the Collar to prevent it from falling). Use the Wrench provided if
necessary.
3. Slide the Housing away from the Head.
4. Remove the spent Cartridge and insert the Replacement Cartridge
(be sure the two Dispensing Holes are at the top).
5. Inspect the O-Ring at the top of the Housing and ensure that it is
seated properly.
6. Slide the Housing back under the Head and lift and tighten the Collar
by turning clockwise. Secure the Collar with the wrench provided.
7. Turn the black top to Softener to resume water flow.
8. Check for leaks. If leaks exist, confirm that the bottom Collar is
tightened securely to the Head.
If leaks persist, return the black top to By-Pass or Off, remove the Collar,
slide the Housing away from the Head and check that the O-Ring is in
good condition and properly seated. Reattach the Housing as before
and repeat steps 7-9.
