Nuvo Concerto NV-I8DMS, Руководство пользователя

Страница: 8 / 34

8
Concerto
Amplifier Back Panel
1. Variable Lineouts: These preamp lineouts are used for sending an audio signal to an external power
amplifier. This is useful for large areas that require additional pairs of speakers. Use
the variable output when you want the additional amplifier to be controlled by the
zone’s Display Pad.
2. Fixed Lineouts: These preamp lineouts are used for sending an audio signal to an external power
amplifier when additional speakers are needed. This output is constant, so an amplifi-
er connected to it will not change volume with that zone’s Display Pad.
3. Source Inputs: The Concerto will accept up to six audio sources. These are connected to the Concerto
amplifier with standard stereo RCA cables.
4. Speaker Output: Six of the Concerto’s eight zones are amplified. These outputs accept 16-gage, two-con-
ductor speaker wire and provide 40 watts per channel of power.
5. Source Link: This connection is used in conjunction with the Concerto Expander System to create
16 total zones. The source link cable is supplied with the Expander System.
6. Source Status Inputs: These optional inputs can be used to monitor source power status. This is useful when
using a macro string of commands to prevent turning off a piece of equipment that is
already on and vice versa.
7. Zone Trigger Outputs: These 12-volt outputs can be used to trigger an external device, such as an auxiliary
power amplifier, for use in a specific zone.
8. IR Emitter Outputs: IR signals received from the keypads are passed through the IR outputs to the source
equipment using the supplied IR emitters. Outputs 1-6 are routed to the corresponding
sources, and the SUM outputs 1 and 2 are common and will pass all IR signals.
9. SYS. ON: This is a constant 12-volt output for turning on external equipment.
10. EXT. MUTE: This input is designed to temporarily mute any audio playing through the system
when the doorbell or phone rings. This works in conjunction with the NuVo NV-MI1
mute interface accessory.
11. Network Input: This RJ-45 connection is the input for all zone information coming from the Concerto
Display Pads. The connection is made using the Network Cable supplied with the package.
12. Digital Link: This connection is used in conjunction with the Concerto Expander System to create
16 total zones. The Digital Link cable is supplied with the Expander System.
13. RS232: The bidirectional RS232 is a serial communication port that allows the Concerto
System to be controlled by an external home automation device.
14. AC: A detachable power cord connects the system to an external AC power supply.
R
OUTPUT POWER
OUTPUT POWER
20W/6OHM X2 20W/6OHM X2
SYS ON
EXT. MUTE
L
R
L
R
L
R
VARIABLE
OUTPUT
FIXED
OUTPUT
SUM1
3033118
C US
CONFORMS TO
UL STD.6500
CERTIFIED TO
CAN/CSA STD.E60065
NuVo Technologies Cincinnati Ohio USA
FUSE:T5 A 120V 60Hz 500W
MODEL NV-I8DM
SIX SOURCE EIGHT ZONE
AUDIO DISTRIBUTION SYSTEM
www.nuvotechnologies.com
OUTPUT POWER
OUTPUT POWER OUTPUT POWER
20W/6OHM X2
20W/6OHM X2 20W/6OHM X2 TIP=L
RING=R
VARIABLE
OUTPUT
FIXED
OUTPUT
TIP=L
RING=R
VARIABLE
OUTPUT
FIXED
OUTPUT
TIP=L
RING=R
VARIABLE
OUTPUT
FIXED
OUTPUT
TIP=L
RING=R
VARIABLE
OUTPUT
FIXED
OUTPUT
TIP=L
RING=R
VARIABLE
OUTPUT
VARIABLE
OUTPUT
FIXED
OUTPUT
FIXED
OUTPUT
TIP=L
RING=R
TIP=L
RING=R
1 2 3 4 5
6
1 2 3 4 5 6
2 3 4 1
1
2 3
RS-232
CONNECT TO
NV-I8X
USE NV-SLC1
CABLE
CONNECT TO
NV-I8X
USE NV-SLC1
CABLE
CONNECT TO
NV-I8EZP1
USE NV-NC1
CABLE
USE CNLY WITH 250V FUSE
4 5 6 SUM2 5 6 7 8
OUTPUT POWER
20W/6OHM X2
ZONE 6 ZONE 6
ZONE 7&8
SYSTEM ZONE TRIGGER OUTPUTS SOURCE LINK SOURCE INPUTS
ZONE 1
NETWORK EMITTER OUTPUTS DIGITAL LINK
ZONE 3 ZONE 4 ZONE 5 ZONE 2 PROGRAM
6 4 5
3
1
2
SOURCE STATUS INPUTS
1 2
3 4
5
6
7
8
9 10 11
12
14 13