Nuvo B2AV800 Series, Инструкция по эксплуатации

Страница: 59 / 85

B2AV800 Series Surgical Table
IM-B2AV800-E01
5-17
No. Description
Rotary Knob (#5) Override Control (#11)
1. Fuse (neutral) No. Description Up Down
2. Fuse (live) 12. Floor Lock Lock Unlock
3. Wire Collect Tie 13. Slide To head To leg
4. Power Cord Socket 14. Height Up Down
5. Manual Rotary Knob 15. Tilt Left Right
6. Foot Control Socket 16. Trendelenburg Rev. Trend. Trend.
7. AC Power Indicator (Green LED) 17. Back Up Down
8. Battery Level Indicator(10 bars: Full, 5
bars: Mid, 2 bars: Low)
9. (not used)
10. ON/OFF Switch (to actuate movement)
11. Override Control Switch (to control
direction of movement)
The B2AV800 Series tables are equipped with Override System (Figure 5-3) for controlling
table movements in the event of Hand Pendant malfunction. The system consists of an
on/off switch, a manual rotary knob and an override control toggle switch.
1. Turn knob (# 5, Figure 5-3) to select a desired movement.
2. Toggle switch (# 11, Figure 5-3) up or down towards the direction of desired movement.
Note: If the table moves by itself, return the Override Control toggle switch to its
neutral position, which is in the middle, and call for service
Remarque: Si la table se déplace d'elle-même alors que vous activez le système de
commande de priorité, désactivez-le immédiatement et appelez un
technicien en entretien et en réparation
.
3. Toggle switch (#10, Figure 5-3) to activate the movement.
4. Repeat step 1, 2 and 3 as many time as needed to create a desired table position.
Note:

Override System is only suitable for NORMAL patient orientation.

Although table positioning can be performed with the Override System, the problem
should be corrected as soon as possible. Have a qualified service technician repair
the table before further use.