FOR YOUR INFORMATION
DEVICE DESCRIPTION
SAFETY TIPS
INITIAL USE
IMPORTANT
GENERAL ADVICE
FUNCTIONS OF THE STEAM STERILISER
PARTS
WARNING
TO AVOID DAMAGE TO THE DEVICE, PLEASE OBSERVE THE FOLLOWING:
With this device you can sterilise with hot steam the equipment you use to feed your baby, as well as
small toys, that can be boiled in accordance with manufacturer guidelines. The device is intended for all
commercially available baby bottles.
The device has the following functions:
•
6-minute sterilization (once water boils)
•
Keeps items placed in the unopened device sterile for up to 24 hours
The device is intended for use in the domestic/private environment only, not in commercial situations.
•
During the warming process, the water becomes hot (risk of scalding).
•
Keep packaging material away from children (risk of suffocation).
•
Do not remove the lid during the sterilisation process (risk of scalding).
•
Do not touch the device or the lid during the sterilisation process.
•
Never open the steriliser before the process is completed; the items are not yet sterilised.
•
Allow the device to cool down before changing the setting, removing parts from,
transporting or cleaning the device (risk of scalding).
•
Keep small parts out of reach of children.
•
Make sure that cables are not accessible to children.
•
The device must only be used on a mains socket with a residual-current protective device
(risk of electric shock).
•
Unplug the mains cable after each usage and before any cleaning (risk of electric shock).
•
Pull the mains part plug out of the socket in the case of operational faults, before cleaning
and when the device is not in use.
1. Before use, ensure that the device and accessories (including mains cable) do not have
any visible damage.
2. Place the device on a firm, level surface.
3. Put all the included parts of the steriliser together:
– Insert the central frame into the designated opening on the lower rack for bottles.
– Turn the central frame clockwise until it clicks into place.
– Put the glass bottle support as well as upper rack for small parts on the central frame,
until they are resting flat.
4. Plug the mains plug into a socket and turn on the switch on the back. The display shows 0.
The device is ready for use.
Before using for the first time, let the sterilisation process run once without any parts to be sterilised.
For this, follow the steps in the ‘Operation’ section.
•
Fill the device with water before switching it on.
•
Do not operate the device outside.
•
The device must only be used on an AC network and with the voltage specified on the type plate.
•
Unwind the mains cable fully in order to avoid overheating.
1. Cover with steam outlet
2. Sterilisation base with
heating plate
3. Touch button & LED display
4. Measuring cup (120ml)
5. Gripping tongs
6. Upper rack for small parts
7. Glass bottle support
8. Central frame
9. Lower rack for bottles
•
Repairs must only be carried out by Customer Services or authorised suppliers. Do not open or repair
the device yourself under any circumstances, otherwise its perfect functioning is no longer guaranteed.
Failure to observe this will invalidate the warranty.
•
If you should have any questions about using our devices, please contact either your retailer or
customer services.
•
Keep the mains cable away from hot surfaces.
•
Do not remove the mains plug from the socket by pulling on the cable!
•
Do not pull, twist or bend the mains cable.
•
Never submerge the device in water. Never rinse it in running water.
•
Do not use any additional parts that are not recommended by the manufacturer
or offered as accessories.
1084
Digital Steam Steriliser
SteriEasy Pro
EN
6.
9.
7.
8.
4.
1.
5.
2.
3.
14
15
