Do not touch the hot surfaces.
Do not place the appliance on or near hot surfaces, in a heated oven or near
a gas or electric heater.
Unplug the appliance from the power supply before cleaning or storage.
Do not immerse the supply cord, plug or base unit in water or any other
liquid. If appliance is accidentally dropped in water do not recover without
first unplugging the power cord from the power socket.
This appliance does not contain any user serviceable parts inside. Do not
dismantle.
This appliance is for indoor household use only. Do not use outdoors..Do
not use in areas with a high moisture content (example: bathrooms)
Children should be supervised to ensure that they do not play with the
appliance.
This appliance is intended to be used in household
This appliance is not intended to be used by people, including children, with
physical disabilities, sensory and mental disabilities, or lack of experience or
knowledge unless they are properly educated and trained to use the
appliance by a competent person and responsible for their safety.
Cleaning and user maintenance shall not be made by children without
supervision
Keep the appliance and its cord out of reach of children aged less than 3
years .
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
OPERATING INSTRUCTIONS
Before placing items in the appliance for sterilization it is important that all bottles,
teats and accessories are empty and that they are cleaned and fully rinsed in
fresh water.
1.
Place the sterilizer on a flat surface where it is out of reach of children and it
will not be knocked or moved during operation.
2.
Remove the accessory rack and lid from the sterilizer chamber.
3.
Pour an approximate 70ml of pure water into the sterilization chamber.
4.
Place the 5-bottle / 4-bottle rack into the sterilization chamber. The ribs of
the chamber will stand the rack in position.
5.
Place the rinsed bottles with their opening facing downward in the bottle
rack.
6.
Lay teats and other accessories in the accessory rack with their opening
facing downwards.
7.
Place the loaded accessory rack securely on the sterilization chamber
ensuring that the circumference slot on the underside of the accessory rack
fits snugly and securely over the edge of the sterilization chamber.
8.
Replace the lid.
