Nuvico Xcel NCT-5MLC, Руководство пользователя

Страница: 34 / 61

28
Network Camera User Manual
reset the counting daily, weekly or monthly. Click “Reset” to manually reset the current
number of crossing line people/car/bike counting.
3. Set the area of the target counting. Click the “Area” tab to go to the interface as shown
below.
Set the alarm line number and direction. Only one alarm line can be added.
Direction
：
A->B and A<-B can be optional. The direction of the arrow is entrance.
Click the “Draw Area” button and then drag the mouse to draw a line in the image. Click the
“Stop Draw” button to stop drawing. Click the “Clear” button to delete the lines.
Statistics: If enabled, you can see the statistical information in the live view interface. If
disabled, the statistical information will not be displayed in the live view interface.
Check “Statistics” and then move the red box to change the position of the statistical
information displayed on the screen. Click the “Save” button to save the settings.
4. Set the schedule of the target counting. The setup steps of the schedule are the same as
schedule recording setup (See
Schedule Recording ).
5. View the statistical information in the live view interface.
4.4.5 Face Detection
Face detection function is to detect the face appearing in the surveillance scene. Alarms will
be triggered when a face is detected.
The setting steps are as follows: