Nuvico Xcel NCT-5MLC, Руководство пользователя

Страница: 32 / 61

26
Network Camera User Manual
4.4.3 Intrusion
Intrusion : Alarms will be triggered if the target intrudes into the pre-defined areas. This
function can be applicable to important supervision places, danger areas and prohibited areas,
like military administrative zones, high danger areas, no man’s areas, etc.
Go to Config

Event

Intrusion interface as shown below.
1. Enable intrusion detection and select the snapshot type and the detection target.
2. Set the alarm holding time.
3. Set alarm trigger options. The setup steps are the same as motion detection. Please refer to
motion detection chapter for details.
4. Click the “Save” button to save the settings.
5. Set the alarm area of the intrusion detection. Click the “Area” tab to go to the interface as
shown below.
Set the alarm area number on the right side. Up to 4 alarm areas can be added.
Click the “Draw Area” button and then click around the area where you want to set as the
alarm area in the image on the left side (the alarm area should be a closed area). Click the