Nuvico EasyView, Руководство по установке

Страница: 26 / 52

25 Mini PTZ Speed Dome
9. Repeat the steps 2 through 8 for each additional preset position.
10. Select
Save and Exit
by moving the Joystick to the right. Press
ESC
to exit the
Preset menu without saving.
NOTE: Press the Home or OFF button at programmed position to delete the
preset.
SHORTCUT TO PROGRAMMING PRESETS.
Select direction of the camera, zoom and focus to be programmed, then press No.
(
1~64
), and then press
SHFT
,
PRST
subsequently. The current view will be stored to
the selected preset number if position is empty. If selected preset number is not empty,
“PRESET EXISTING” message will be displayed on the monitor and you will be
prompted to overwrite.
Example
:
1
,
0
+
PGM
+
PRST
will memorize current view as preset No.
10
. In this case,
focus and Iris mode will be memorized as auto and dwell time will be set to 3 sec.
3.1.3 PATTERN (
MENU
=> FUNCTIONS => PATTERNS or Shortcut:
PTRN
)
The Pattern function memorizes and stores movement of the selected dome camera for
up to 60 seconds. Pattern can be stored in 60 seconds of total recording space. Stored
pattern is played back by pressing
No.
+
PTRN
buttons subsequently.
Follow the steps below to program the Pattern:
1. Press
MENU
key to display the main menu on the monitor.
2. Simply press the
PTRN
key.
(
or
MENU
=> FUNCTIONS =>PATTERN)
3. Select the empty Pattern number to be programmed by moving the
Joystick
Up
or Down. If SEC column is not 000, then the selected No. of pattern is already
recorded.
PATTERN SETUP
NO. TITLE SEC
01 : xxxxxxxxxxxxxxxx 000
02 : xxxxxxxxxxxxxxxx
03 : xxxxxxxxxxxxxxxx
04 : xxxxxxxxxxxxxxxx
TOTAL : 000
SAVE AND EXIT