Nuvico Easy Trak SC-S36 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 68

background image

6

Important Safeguards

•  Read these instructions.
•  Heed all warnings.
•  Follow all instructions.
•  Do not use this equipment near water.
•  Clean only with dry cloth.
•  Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other

equipment (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replace-
ment of the obsolete outlet.

• Protect the power cord from being walked on or pinched, particularly at plugs, conve-

nience receptacles, and the point where they exit from the equipment.

•  Only use attachments/accessories specified by the manufacturer.
•  Unplug this equipment during lightning storms or when unused for long periods of time.
•  Refer all servicing to qualified service personnel. Servicing is required when the equip-

ment has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the equipment, the equipment has
been exposed to rain or moisture, does not operate normally, or has been dropped.

• CAUTION - THIS MANUAL IS FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO RE-

DUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN
THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO
DO SO.

• Use Certified/Listed Class 2 power supply transformer only.

«
...
4
5
6
7
8
...
»

Содержание Easy Trak SC-S36





































































Отзывы:

Нет отзывов

Похожие инструкции для Easy Trak SC-S36

Бренд: Samsung Страницы: 40

Бренд: Gamewell Страницы: 21

Бренд: DAGE-MTI Страницы: 16

Бренд: NA-DE Страницы: 7

Бренд: FBII Страницы: 83

Бренд: FBII Страницы: 10

Бренд: NA-DE Страницы: 8

Бренд: Watcher Страницы: 19

Lorex LNC250 PING Series

Бренд: FLIR Страницы: 2

TempControl HTA-100

Бренд: Symmons Страницы: 4

Бренд: Keysight Technologies Страницы: 19

NAC-HD-329VL/60

Бренд: Navaio Страницы: 2

QC804-261-1 NVR

Бренд: Q-See Страницы: 11

Бренд: Rohm Страницы: 9

VIP-CAM-30-20 Series

Бренд: PureLink Страницы: 20

Бренд: Vitek Страницы: 28

ELI-SIP-PPTZ-21-10X

Бренд: e-Line Technology Страницы: 50

Бренд: Velleman Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды