17
2.1.7 EasyTrak™ PTZ Dome Camera Address (ID)
Each EasyTrak™ PTZ dome camera must have a unique address (ID). Identical IDs on the
same line may damage the control circuit caused by an electrical short. When install-
ing multiple cameras or a DVR, it is recommended that cameras ID’s be identical to the
camera port of the DVR.
Cam Port 1 = Dome ID 1, Cam Port 2 = Dome ID 2 ... Cam Port 16 = Dome ID 16.
If more than 16 PTZ cameras are installed using two or more DVRs the following formula
is usedful to determine the Dome ID: ID = 16x (n-1) +m (Where n = number of DVR, m =
Camera Port)
Refer to Figure. 8 for setting the EasyTrak™ PTZ dome camera address (ID) and
protocol selection.
2. Installation and Configuration
.
.
9
9
100 10
0
.
1
9
.
999
001
DOME ID
1
0
100 / 10 / 1:
Indicates the digit
placement of the Dome ID number.
The ‘100’ dial determines the 100th
digit number. If set to ‘9,’ the Dome
ID would be 900. The ‘10’ dial
determines the 10th digit number,
and the ‘1’ being the last number of
the camera ID.
