9
Parts & Descriptions
Front
1. Sensor Protective Cap
Be sure to cap the lens mount when the lens is not mounted.
Pull out the cap to mount the lens.
. CS-Mount Lens Adaptor
Used to mount a CS-mount lens.
. C-Mount Lens Adaptor
Used to mount a C-mount lens.
. Back Focus Set Screw
If needed adjustment of back focus, loosen the set screws using L-wrench to turn
CS-mount lens adaptor and tighten the set screw after adjustment.
. Tripod Mount Hole
Use to install the camera on the mount.
The tripod must be equipped with the 1/4”-20UNC(20 Thread) screw.
Bottom
