OSD Menu Terms & Settings
The PZM is used to mask specific areas within the frame of the camera to be
concealed. A total of 8 areas can be masked.
To setup the Privacy Zone masks, follow the
simple instructions below.
1.
Select the ZONE NUMBER (1-8), then scroll
down to ENABLE and press the LEFT/RIGHT
Key to turn the ENABLE to ‘ON’ to display the
selected privacy zone mask.
.
Select the SIZE SETTING, then press the
LEFT/RIGHT Key to enter the move screen.
At the H/V START SET option, adjust the width
and height of the area concealed by pressing
LEFT/UP (increasing) or RIGHT/DOWN (decreas-
ing). At the H/V END SET option, adjust vice
versa by pressing LEFT/UP (decreasing) or RIGHT
DOWN (increasing).
To change H/V START SET option to H/V END SET
and vice versa, press ENTER key. To exit, hold the
ENTER Key down for 2 or more seconds.
.
Change the COLOR and ALPHA (Transparency)
as needed.
.
Repeat steps 1-3 many times as necessary to
conceal all the unwanted areas.
4.2 PZM SET (Private Zone Masking)
