manualshive.com logo in svg

Nuvation BMS NUV300-BC-12, Руководство по установке

Поделиться
Скачать
Nuvation BMS NUV300-BC-12 Скачать руководство пользователя страница 4

1. Introduction

Thank you for choosing Nuvation BMS™

Nuvation BMS™ Low-Voltage Battery Controller is an enterprise-grade battery management
system with features that extend battery life, ensuring battery safety, and cell balancing.

You can take advantage of the highly configurable browser-based user interface and custom-tune
Nuvation BMS™ Low-Voltage Battery Controller to your specific target application.

1.1. About this Guide

This 

Installation Guide: Nuvation BMS™ Low-Voltage Battery Controller

 provides wiring

instructions to connect your Nuvation BMS™ Low-Voltage Battery Controller to your system.

Once you have successfully completed the installation process, please follow instructions in the
Operator Interface Guide for accessing and configuring the Nuvation BMS™ Operator Interface for
the Battery Controller.

We thrive on your feedback and what we build is driven by your input. Please submit
support tickets to 

[email protected]

.

Installation Guide - 2018-10-08, Rev. 2.0

2

Содержание BMS NUV300-BC-12































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды