Nuvair Pro Trio, Руководство пользователя

Страница: 31 / 48

Pro Trio Analyzer Manual
Page
31
NUVAIR www.nuvair.com
10.12 Pro CO
2
Powering Off
At the home or gas reading screen, hold down the On/Off button for a couple of seconds.
The Analyzer will display “OFF” and then go blank.
10.13 Pro CO
2
Factory Reset
In case it is necessary to reset the Pro CO
2
Analyzer to the factory settings, power on the
Analyzer by pressing the “On/Off” and “Adjust” buttons at the same time. On the display
will appear “res” and the instrument will go to the reading page.
In case of reset, the instrument will delete all the alarms settings and the full scale value.
Before using again the instrument, it may be necessary to program again the alarm
values and the full scale value. All the analysis concentration shown on the display could
be wrong. Wrong Carbon Dioxide analysis may lead to death. You should calibrate your
analyzer immediately after a reset before using.
10.14 Pro CO
2
Sensor Replacement
The sensor is not user replaceable. The unit must be shipped to Nuvair for service.