Pro CO Carbon Monoxide Analyzer
16
www.nuvair.com
7.0. Factory Reset
In case it is necessary to reset the Pro CO Analyzer to the factory settings, power on
the Analyzer pressing at the same time for more than one second the Power and “Cal”
buttons. On the display will appear “res” and the instrument will go to the reading page.
You will need to open the Pro CO analyzer and get the Values from the sensor
for inputting into the PRO CO analyzer before using.
In case of reset, the instrument will delete all the alarms settings, the full scale value,
any new conversion value of Carbon Monoxide sensor and of the gain factory. Before
using again the instrument, it may be necessary to program again the alarm values,
the full scale value, and the conversion value of Carbon Monoxide sensor and gain
factor if changed. All the analysis concentration shown on the display would be wrong.
Wrong Carbon Monoxide analysis may lead to death.
8.0. Maintenance
8.1. Analyzer Care
Analyzers immersed in liquid or stored in wet environments may not operate properly.
This may result in incorrect readings. Incorrect gas analysis may result in personal
injury or death.
Protect the analyzer from excessive shock and impact. Excessive shock and impact
may result in incorrect readings. Incorrect gas analysis may result in personal injury
or death.
Protect the analyzer from exposure to hyperbaric environments. Exposure to
hyperbaric environments may result in incorrect readings. Incorrect gas analysis may
result in personal injury or death.
•
Do not clean Analyzer with anything other than a damp soft cloth.
•
Do not immerse in liquid, leave unprotected outside, or store in a wet environment.
•
Protect Analyzer from excessive shock and impact.
•
Protect Analyzer from excessive exposure to sunlight and extreme temperatures.
•
Do not use the Analyzer in a hyperbaric environment.
