background image

 

 

 

NSS Series 

Nuvair 

 

Page 26 

www.Nuvair.com 

 

15.0  Nuvair Fill Containment Station System Warranty

 

 

Nuvair extends a limited warranty, which warrants the fill containment station system to be free from defects in 

materials and workmanship under normal use and service for a limited period.  All other Original Equipment 

Manufacturer (OEM) components used in the system are warranted only to the extent of the OEM’s warranty to 

Nuvair.  Nuvair makes no warranty with respect to these OEM components, and only warrants the 

workmanship that Nuvair has employed in the installation or use of any OEM component.  This warranty is not 

transferable. 

 

Nuvair will, at its discretion and according to the terms as set forth within, replace or repair any materials which 

fail under normal use and service and do not exhibit any signs of improper maintenance, misuse, accident, 

alteration, weather damage, tampering, or use for any other than the intended purpose.  Determination of 

failure is the responsibility of Nuvair, which will work together with the customer to adequately address 

warranty issues.  When any materials are repaired or replaced during the warranty period, they are warranted 

only for the remainder of the original warranty period.  This warranty shall be void and Nuvair shall have no 

responsibility to repair or replace damaged materials resulting directly or indirectly from the use of repair or 

replacement parts not approved by Nuvair. 

 

Maintenance Items 

Any materials which are consumed, or otherwise rendered not warrantable due to processes applied to them, 

are considered expendable and are not covered under the terms of this policy.  This includes maintenance and 

consumable items listed as part of a suggested maintenance program included with system documentation. 

 

Return Policy 

Application for warranty service can be made by contacting Nuvair during regular business hours and 

requesting a Return Material Authorization (RMA) number.  Materials that are found to be defective must be 

shipped, freight prepaid, to the Nuvair office in Oxnard, California USA.  Upon inspection and determination of 

failure, Nuvair shall exercise its options under the terms of this policy.  Warranty serviced materials will be 

returned to the customer via Nuvair’s preferred shipping method, at Nuvair’s expense. Any expedited return 

shipping arrangements to be made at customer’s expense must be specified in advance. 

 

Limitation of Warranty and Liability 

Repair, replacement, or refund in the manner and within the time provided shall constitute Nuvair’s sole liability 

and the purchaser’s exclusive remedy resulting from any nonconformity or defect. Nuvair shall not in any event 

be liable for any damages, whether based on contract, warranty, negligence, strict liability or otherwise, 

including without limitation any consequential, incidental, or special damages, arising with respect to the 

equipment or its failure to operate, even if Nuvair has been advised of the possibility thereof.  Nuvair makes no 

other warranty or representation of any kind, except that of title, and all other warranties, express or implied, 

including warranties of merchantability and fitness for a particular purpose, are hereby expressly disclaimed. 

No salesman or other representative of Nuvair has authority to make any warranties. 

Содержание NSS Series





























Отзывы: