© 20
20 NUUO Inc. All rights reserved.
www.nuuo.com
21
Thermal Camera User Manual
Temperature analysis:
Heat Object temperature: it will display when the heat source reaches the setting temperature (the heat source
temperature should not be lower than the ambient temperature)
Environment temperature value: set the highest critical value of the ambient temperature
All heat sources: Combined heat source temperature. It will be displayed as long as this temperature is exceeded
Enable heat event: After enable, the threshold value of the heat source temperature will be recorded
Enable environment temperature monitoring: the default value is checked, the highest heat source will be the
highest value
6.2 Spot/Box Setting
Show On Image: Show Spot / Display Box, as shown below:
Select Spot/Box: Set the Spot position and Box area in the drop-down menu, as shown in the figure below:
To check and enable different Spot / Box separately.
