© 20
20 NUUO Inc. All rights reserved.
www.nuuo.com
13
Thermal Camera User Manual
5.2 The System Setting
Click the System Settings tab:
Auto run with windows start-up:
The system will automatically load and execute when the host restarts
Show on taskbar tary icon when mini:
to avoid the system being shut down accidentally
Enable Windows OS
: When disable the function, the host will automatically restart when user log out the
system. It is a limitation for user who operating the system alone.
Auto Reboot Windows:
Set up the Begin Time and Elapse Time to restart the host at a scheduled time
Preview tour(second):
The camera can be switched in sequence by selecting split window type at the fixed
time
Make Water-Mark for record file:
To prevent the video data from being tampered after exporting.
Show Snap Shot picture on preview-window:
To preview the photo content in the lower right corner of the
screen
. It’s beneficial
to user confirm the photo is valid directly.
Auto sync with internet-time-server:
To set the synchronization server other than the host system time
Draw Rect on Preview-Window when motion-detection alert:
The red frame indicates the detected
dynamic area, so that the user can immediately get attention to the location of the event
Stop Record when video-source lost:
Save system resources
Enable watch-dog:
Set the enable time
Auto Lock UI:
Set the lock time to prevent users forgetting lock the system from being invaded
Pop text-dialog on alarm:
Strengthen the prompt alert event
Snapshot Mode:
Optional JPEG / BMP format
Windows setting:
Click [Set system time] to modify the host system time
Network Card:
Select network card and Static IP address
Save All Configurations to file:
All configurations in IVS-II settings can be exported