NUUO BL3102, Быстрое руководство по установке

Страница: 3 / 11

2
Physical Overview
Reset:
When the device is powered, press the Reset Button to reboot the device, or hold the Reset
Button for 15 seconds to the settings back to factory default.
Install the hardware and connect all cables
a. Wall mounting and Ceiling mounting
1. Use the 3 supplied screws to fix the base plate to a flat surface.
2. Loosen the screws on the bracket to aim the shooting area.
3. Tighten the screws at the joints of the bracket.
b. Connet all cables
c. RJ45 waterproof connector
b1. Without Power over Ethernet (PoE) connection
1. Connect the 12V power adaptor to the IP Camera.
2. Using a standard RJ-45 network cable, connect the
IP Camera to a normal Hub/ Switch/ Router.
b2. Power over Ethernet (PoE)
Using a standard RJ-45 network cable,
connect the IP Camera to a PoE-enabled
Hub/ Switch/ Router.