Troubleshooting
1. The PKPC235 will not turn on:
• Make sure that the appliance is properly plugged into a power
outlet
• Check the power cord for tears and frays. Do not use the
appliance if the power cord is damaged.
• Make sure the power button is on. The LCD display screen is
showing the information.
. The LCD display screen reads error code:
• E01: NTC Open Circuit. Temperature below 0 degree.
• Turn off the appliance and restart.
• E02: NTC Short Circuit. Temperature over 99 degrees.
• Turn off the appliance and restart.
• E03: The appliance will alarm when the water level drops below
the MIN water level.
• Adjust the appliance to the right water level and appliance will
work again normally.
• E04: The appliance will alarm when the water level over the
MAX water level.
• Adjust the appliance to the right water level and appliance will
work again normally.
• E05: Wrong with motor, please contact with customer support.
Cleaning
With frequent use, descaling should be done every month or as
needed.
1: Put the appliance in a pot and fill the pot with water to the
"Max" level indicated on appliance.
2: Set the appliance temperature to 70
°C
or 158°F.
3: Add 5g of citric acid powder (Food grade) per liter of water
used.
4: Allow the water to circulate for 20 minutes after 70
°C
or
158°F is reached.
5: Turn off and unplug the appliance.
6: When appliance is cool, rinse the bottom in the cold water
and dry before storage.
