OPERATION
1. Clip the
PKPC235
securely inside any deep heat-proof
container without touching the very bottom.
2. Fill the container with water, check the water level indicator on
the
PKPC235
, the water level should be between the min
and max
(the suitable water level to work)
indicator on
the front of the circulator. As the water level will rise when you
add food to the container, so don’t fill it up too high.
NOTE:
As the water temperature increase, the water will begin to
evaporate. The
PKPC235
circulator is equipped with an alarm
which indicate a low water level, if the water level goes below the
min mark, the circulator will shut off.
Water level between max and min, but the Max is the most
suitable level to work.
3. . Connect the power plug, and you will hear a beep then
appliance will switches off. Then press the power button on
the screen hold it for three seconds. The screen will switch on;
the current temperature is flashing (second line). The first line on
the right side of display shows the cooking temperature, the third
line on left side of the display shows the timer. Press the
button to set the Timer. When you press SET initially, the timer is
set to ‘Hour’. You can use up and down to increase or
decrease the hour (00-99 hours). Press on SET button for
second time, and the timer is set to ‘MINUTES’. You can use
up and down to increase or decrease the minute (00-59 min-
utes). The third line on the right side for of display shows the
work time. Press the SET button for third time, the work time for
Hour will flash, you can use up and down to increase or
decrease the hour (00-99hours). Press the set button for forth
time, the work time for MINUTES will flash. You can use up
and down to increase or decrease the minute (00-59 minutes).
