www.ninjakitchen.com
4
6
Place the blade assembly onto the cup and twist it on tightly, clockwise,
until you have a good seal.
(Fig. 1)
7
Turn the cup upside down and place it onto the motor base, aligning
the tabs on the cup with the motor base. Turn it clockwise, until it
“clicks” into place.
(Fig. 2)
8
Follow the operation instructions from the main instruction manual of
the base being used. Press one of the appropriate buttons to start.
(Fig. 3)
9
To remove the cup, ensure that the motor has stopped running. Then
turn the cup counter clockwise
(Fig. 4)
and pull straight up to remove.
(Fig. 5)
10
Turn the cup upright and remove the blade assembly by twisting the
blade assembly counter clockwise. Be sure to store the blade assembly
attached to an empty cup when not in use.
11
Twist the Sip & Seal
®
lid onto the cup to enjoy your drink on the go.
Press flip top cap firmly into the opening to get the best seal. The flip
top cap locks open when pressed backward.
12
Make sure that the motor base is unplugged when not in use.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
