1-877-646-5288
5
Care & Maintenance
CLEANING:
CAUTION: MAKE SURE THAT THE MOTOR BASE IS UNPLUGGED
FROM THE POWER SOURCE BEFORE INSERTING OR REMOVING
ANY ATTACHMENT AND BEFORE CLEANING.
CAUTION: DO NOT IMMERSE THE MOTOR BASE INTO WATER OR
ANY OTHER LIQUID.
CAUTION: HANDLE THE BLADE ASSEMBLIES CAREFULLY AS
THE BLADES ARE VERY SHARP!
1
Separate/remove all parts form each other.
2
Clean the motor base with a damp cloth and wipe dry.
3
Place the cup, lid and blade assembly in the top rack of the dishwasher.
STORING:
1
Store the Nutri Ninja
®
cups, the Sip & Seal
®
lids and blade assembly
where they will not be damaged and won’t cause a hazard.
Troubleshooting
Unit doesn’t turn on:
• Make sure the unit is plugged in.
• Insert and rotate cup clockwise in the base until it “clicks”.
Unit doesn’t turn off:
• Remove cup from base by rotating cup counterclockwise and lifting out.
Display should turn off. Unplug the power cord from the outlet.
Lid/blade assembly hard to assemble:
• Do not overfill the cup with solid ingredients.
• Set the cup on a level surface. Place the lid or blade assembly on the
top of the cup and align the threads so that the lid/blades sit flat on the
cup. Twist clockwise so that the lid/blades evenly align to the cup until
you have a tight seal.
Doesn’t mix well, food gets stuck:
• Pulses and pauses allow the food to settle towards the blade. If food is
routinely getting stuck adding some liquid will usually help.
• When loading the cup, start with fresh items, followed by frozen items
or ice. Add dry or sticky ingredients such as powders or syrups last.
For best results, use at least 1/2 cup liquid.
• For best results, use Auto-iQ
™
programs. Pulses and pauses allow the
food to settle towards the blades. If ingredients are routinely getting
stuck, add additional liquid or reduce the amount of hard or frozen
ingredients in the cup.
