NUTOOL NTS1500 Скачать руководство пользователя

Страница: 28 / 172

SPECIFIC SAFETY INSTRUCTIONS

WARNING! Some wood and wood type products, especially
MDF (Medium Density Fibreboard), can produce dust that
can be hazardous to your health. We recommend the use of

an approved face mask with replaceable filters when using this

machine in addition to using the dust extraction facility. Ensure

that power tools are disconnected from the mains supply when
not in use, before servicing, lubricating or making adjustments

and when changing accessories such as blades, bits and cutters.
Do Not use blades made from High Speed Steel. Do Not stop
the blade by forcing the machine or by using sideways pressure.
Do Not fit a grinding or cutting disc to this machine. Always use
the correct type of blade for the operation to be carried out.
Do Not use blades that are bent or have missing teeth. This is

highly dangerous and could result in a serious accident causing

injury to the operator, bystanders and damage to the machine.

Only use blades that are recommended by the supplier and

that are in good condition. Do Not use blades that are larger
than specified. Only use blades that are rated for the machine.

The rotational speed shown on the blade should always be

HIGHER than the rotational speed of the machine. Ensure that

the directional arrow marked on the blade corresponds with the

rotational direction of the motor. The teeth of the blade should
always point downward as viewed from the front of the saw. Do
Not lock the blade guard in the up position. Ensure that movable
guards operate freely without jamming. Keep Guards in place
and in good working order. With the machine disconnected from

the mains supply check the operation of the guard to ensure

that it operates correctly. Do Not use blades the body of which

is thicker or the set of which is smaller than the thickness of the

riving knife. (See Illustration “A”) Always ensure that the distance

between the riving knife and the toothed rim of the saw blade is

not more than 5mm. (See Illustration “B”) Always ensure that the

toothed rim of the saw blade does not extend more than 5mm

beyond the lower edge of the riving knife. (See Illustration “C”)
Always keep the blade securing arbor and collars clean.

Whenever replacing blades ensure that the recessed surface
of the blade collar fits snugly against the surface of the blade.

Ensure that the blade securing bolt is securely tightened using

the wrenches  provided. Do not over tighten.  Use only blades
that  are  recommended  by  the  manufacturer.    Do  not  start
the  machine  with  the  blade  in  contact  with  the  work  piece.

Check the work piece for any protruding nails, screw heads

or anything that could damage the blade. Do not attempt to
modify the machine or its accessories in any way. Do not force

the machine let the machine do the work this will reduce the
wear on the machine and blade and increase its efficiency and

operating life.  Approved ear defenders should be worn when
using  circular  saws.    Do  not  cut  timber  greater  than  75mm,
Metal, Stone,  Rubber, Plastic, Bones, Etc.  Do not fit any other
tool or combination of blades.  Do not modify the machine or its
guards/controls in  any way.  Do not use with any covers/guards
removed.  Always  use  the  blade  guard,  riving  knife  and  anti
kickback  paws  for  every  operation,  including  through  sawing.

Through sawing operations are those in which the blade cuts

completely through the work piece when ripping or crosscutting.
Always hold the work firmly against the mitre gauge or fence.
Always use a push stick for ripping narrow stock. Refer to
ripping applications in instruction manual.

Always use either the fence or the mitre gauge to position and
guide the work. Never stand or have any part of your body in line
with the path of the saw blade. Keep your hands out of the line
of the saw blade. Never reach behind or over the cutting tool for
any reason. If off cuts of wood become jammed in the machine,
switch off and disconnect from supply before removal. Feed the
work piece into the blade against the direction of rotation only.
Never use the rip fence as a cut-off gauge when cross-cutting.
NEVER attempt to free a stalled saw blade without first turning
the saw OFF.

Provide adequate support to the rear and sides of the saw

table for wide or long work pieces. Avoid kickback (work thrown
back toward you) by keeping the blade sharp, keeping rip fence
parallel to the saw blade, keeping spreader and anti-kickback
pawls (if fitted) and guard in place. Do not release work before
it is pushed all the way past the saw blade. Do not rip work that

is twisted or warped or does not have a straight edge to guide

along the fence. Avoid awkward operations and hand positions

where a sudden slip could cause your hand to move into the

blade. Never use solvents to clean plastic parts Solvents could
possibly dissolve or otherwise damage the material. Only a
soft damp cloth should be used to clean plastic parts. Use in
a well ventilated area. Remove sawdust frequently. Clean out

sawdust from the interior of the saw to prevent a potential fire

hazard. Saw dust is potentially hazardous to health. Always use

a suitable dust collection system and wear an approved face

mask.