OPERATION MANUAL
FLEXESERVE HUB®
FLEXESERVE® | Operation Manual Flexeserve Hub® North America | V1 MAR 2021 | 40003230
Page | 20 of 22
Base Tray
Ensure that the unit is empty before cleaning the base tray.
Figure 1
Figure 2
Figure 3
Figure 4
Use the handle to lift out and remove the base tray (Figure 1). Clean using mild detergent and a soft
cloth.
Carefully remove the crumb catcher using the 2 finger holes (Figures 2 & 3). Dispose of crumbs and wipe
over using mild detergent and a soft cloth.
Use a vacuum to remove any crumbs and debris. Wipe over the base fan cover using mild detergent and
a soft cloth.
WARNING
Avoid allowing debris to enter the fan apertures.
Wipe the back panel using mild detergent and a soft cloth.
Reassemble the base tray and crumb catcher once the above cleaning process is complete.
Door Seals
The inner door seals will need to be removed for cleaning.
Figure 5
Figure 6
Figure 7
Figure 8
Remove the door seal by carefully pulling the seal outwards from the corner (Figure 5) until it is
completely removed from the door.
Clean using warm, soapy water and a soft cloth. Dry using a clean soft cloth or paper tower.
